Proglaze® Silicone Sealant

Product # D030063

Single-component, moisture-cure, acetoxy silicone sealant for glazing

Proglaze® is a single-component, moisture-cure, acetoxy, silicone sealant for a variety of in-field and in-plant glazing applications. Cures rapidly to produce a durable, flexible seal.


- Produces durable, flexible seal.
- Comes ready-to-use with no mixing required for immediate application with conventional caulking equipment.
- Moisture curing and easily gunned in all types of weather conditions.
- Selected colors (Proglaze Clear, White, Aluminum and Black).
- Acceptable for indirect contact with edible products under USDA requirements for use in federally-inspected meat and poultry plants.
- Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.


Product #
Optimal Adherence to
Glass, Plastic, Aluminum, Painted Metal
Tooling Time
7 to 15 minutes
Skin Formation Over Time/Dry to the Touch
10 to 20 minutes
10.1 oz*
100% RTV Silicone, Acetoxy Silicone
VOC Concentration (EPA Method 24)
36 grams per liter
Recommended Use
Interior, Exterior, Aluminum Windows, Shower Stall, Vinyl/PVC Windows
Packaging Specifications
Plastic Cartridge
Standards and Certifications
ASTM C920, CAN/CGSB-19.13-M87

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


Basic uses:
Proglaze provides a high performance seal for a wide variety of glazing applications such as cap bead, toe bead, heel bead, butt glazing and metal-to-metal joints.
Additional uses include a variety of in-plant applications where a gun-grade sealant is required.


Sealant dimensions:
- For joints 6.4 mm (1/4") to 12.7 mm (1/2"), the width-to-depth ratio should be equal
- Joints 12.7 mm (1/2") wide or greater should have a depth of 12.7 mm (1/2")
- Minimum joint size is 6.4 mm x 6.4 mm (1/4" x 1/4")

- Verify compatibility with substrate prior to use
- Do not apply to damp or contaminated surfaces
- Use with adequate ventilation
- Not intended for continuous water immersion
- Do not use on surfaces sensitive to corrosion by acetic vapors (a by-product of sealant cure)
- Not for use on concrete brick or mortar substrates